The peanut shelling machine adopts v-belts for transmission. After using for a period of time, the new belt would be elongated and becomes slack gradually under the force of tension. Thus, you need to check the tensioning degree of each drive belt and whether the clearance between the coordination parts is appropriate periodically and adjust it timely. During operation, you should often pay attention to the machine's speed, sound and temperature. Each time finished a species or a day job, you should stop the machine and check whether each bearing is overheating and whether the fastening screw and key pin of each part are loose. You need to tighten it at any time if it is loose. Each time after operation, you need to clean the bottom of the screen, namely hole slot of the cowl flap with wire brush regularly. After the processing season, make a major inspection for the machine. Check the operation and wear of the bearing; whether there is deformation or crack in the bottom of the screen; the wear condition of separating screen. After inspection, repair the damaged part, clear away the dirt and peanut residue in the machine. After using the peanut sheller, the belt need to be removed and the machine should be placed in a dry warehouse. The belt removed should not be hanged on the interior wall and exposed to sunshine.
In addition, the feeding of peanuts into the peanut shelling machine should be uniform. Iron, stone and other debris are forbidden to be mixed in the peanuts to prevent mechanical accident and damage of peanut shelling machine.
KMEC has been dedicated to manufacturing and technology research of peanut machinery for a very long time. Our products includes:peanut picking machine, peanut shelling machine, peanut sieving machine, peanut peeling machine, peanut roaster machine, peanut grinder machine, peanut coating machine and fried peanut production line other accessory equipment.