Peanut sheller machine is a kind of mechanical equipment used to remove peanut shells. Its appearance and use greatly improve the processing efficiency of peanuts. However, in actual production, many farmers and processing plants report that the peanut sheller has a high crushing rate, which has brought many troubles to the production and processing links.

So, what are the common reasons for the high crushing rate of peanut sheller machine?

The design problem of the equipment itself.

Some peanut shellers equipment did not consider the fragility of peanut shells in design, which led to excessive extrusion and impact on peanuts during shelling, thus making peanuts easy to break. Therefore, equipment manufacturers need to fully consider the characteristics of peanuts when designing peanut sheller machine, and reasonably design the sheller to reduce the damage to peanuts.

Technical level and operation method of operators.

Some operators may have improper operation, excessive force or too fast speed when using peanut sheller, which will increase the possibility of peanut crushing. Therefore, for operators, it is necessary to undergo professional training, master the correct operation method and adjust the parameters of the sheller reasonably to reduce the crushing rate of peanuts.

Quality problems of peanut raw materials.

If there are quality problems in the raw materials of peanuts, such as too high water content, too much impurities, too long storage time, damp and moldy, etc., peanuts will become fragile, thus increasing the crushing rate in the shelling process. Therefore, it is also very important for the selection and quality control of peanut raw materials. Only by ensuring the quality of raw materials can the crushing rate of sheller be effectively reduced.

Maintenance is not in place.

If the peanut sheller is not cleaned and maintained for a long time, resulting in serious wear or failure of equipment parts, abnormal vibration and unstable operation will occur during use, thus increasing the possibility of peanut breakage. Therefore, regular maintenance of the peanut shelling machine and timely replacement of worn parts are the key to reduce the crushing rate.

To sum up, the reasons for the high crushing rate of peanut sheller machine mainly include equipment design, technical level of operators, raw material quality and equipment maintenance. Only by improving these aspects can we effectively reduce the crushing rate of peanut sheller, improve production efficiency and product quality, and provide better support for agricultural production.