Roasting peanuts is the most common peanut processing technology. After roasting, the raw taste of peanuts was removed, and the rich fragrance is increased.The professional equipment used in peanut roasting is peanut roasting machine. Some faults may be encountered in the use of peanut roaster machine, and they must be solved in time to ensure the normal use of peanut roaster machine and the roasting quality of the final product.

Common failures and solutions of peanut roasting machine are as follows:

1. The drum speed is fast and slow, because the belt is too loose. Solution: Tighten the belt.

2. The drum does not turn, and the belt breaks. Solution: Replace the belt. 

3. The heating rate is too slow, and the electric heating tube is partially or completely burnt out. Carefully check and replace the electric heating tube.

4. In the process of heating up, there is a temperature failure, the upper temperature limit works normally, and the lower temperature limit shows that the temperature drops continuously, because the thermometer and thermocouple fail, so replace the thermostat and thermocouple of the same model.

–> How to clean the peanut roasting machine?

The above are the common faults in the use of peanut roasting machine and their solutions. The appearance of peanut roasting machine greatly facilitates our life and improves the roasting efficiency of peanut products. Peanut roasting machine is easy to use, has good roasting effect, has the characteristics of high temperature resistance, corrosion resistance, low fuel consumption, high thermal efficiency, convenient movement, easy maintenance and wide use, and is a machine worthy of trust and choice.