Groundnut picking machine is mainly composed of a feeding part, a fruit picking part, a wind-driven impurity removing part, a screening part and a bagging part. When the groundnut picker is working, the motor or diesel engine drives the machine to run and enter the fruit picking system through the feed inlet or the automatic feed table. The peanut is separated from the stem by the rotation and impact of the drum picking rod, and the fruit and sundries fall to the vibrating screen through the intaglio hole, and the stem is discharged from the discharge outlet. The sundries scattered on the vibrating screen are transmitted to the impurity suction port of the fan through the vibrating screen to remove impurities, and clean fruits are selected, thus completing the whole process.

The correct use of groundnut picking machine is as follows:

1, The groundnut picking machine must be adjusted and overhauled before use. Before the operation, the operator should conduct a comprehensive inspection of the peanut picker to see if the diesel engine is running well; See whether the peanut picker is in good condition, whether the connecting bolts of all parts are fastened, whether the pulleys are installed firmly, whether there is collision and friction when the pulleys are rotated by hand, and whether there is open welding and missing teeth in the tooth rolling of the fruit picking part; Turn the hobbing shaft by hand and observe whether the rotation is stable; Check whether the tension of V-belt at each transmission part is reasonable; Check whether the motor is operating normally and whether the power cord is leaking. In addition, all rotating parts should be equipped with protective covers; During the trial operation, the staff should leave the peanut picker first, and start the trial operation after the operator sends out the specified signal.

2, The operation shall be carried out according to the technological process. When feeding peanut seedlings, the peanut bearing part must be filled into the feeding port first, and the feeding should be uniform; It is forbidden to feed hard objects such as stones, wood blocks and metal objects into the machine during operation, so as to avoid damaging the machine and causing personal accidents; When working, it is forbidden to put your hand into the feed inlet, fan inlet and trash outlet; When working, the operator should tie the sleeves tightly and the lesbians should wear working caps. If you hear abnormal sounds or find faults during operation, you must stop the machine for inspection and remove the faults in time. It is strictly forbidden to work with the machine sick. It is forbidden to overload the peanut picker; After work every day, professionals should check, adjust and maintain it. Such as: filling grease, repair welding, etc.; When the groundnut picker can’t pick clean, it is necessary to adjust the gap between the hobbing and the bottom of the screen. Large clearance between hobbing and screen bottom will easily lead to incomplete picking.

3, During operation, if peanuts are blown out, adjust the upper and lower positions of the fruit sliding plate; If the peanuts jump out, the position of the fruit baffle should be adjusted; If the fruit is not clean, the clearance between hobbing and sieve bottom should be adjusted; If the cleaning is not clean, you can increase the number of fan revolutions or lower the wind baffle; If peanuts are entrained during cleaning, the fan speed should be reduced and the wind deflector should be raised.

–> How to guarantee the quality of peanut picking machine

4, In the process of operation, when the drum is blocked, it is necessary to check the feeding amount, the humidity of peanut vines, the tightness of the V-belt and the power supply voltage. When working in excessive humidity or rainy weather, the feeding amount should be appropriately reduced to avoid blockage.

5, If the automatic bagging device is adopted, when the automatic bagging of peanuts is almost full, the diverter plate should be moved in time to prevent blockage.

The above are the correct ways to use the groundnut picker. When using the groundnut picking machine, it is necessary to operate in strict accordance with the operation flow, and there should be no illegal and wrong operation to avoid potential safety hazards to the equipment. Only by using groundnut picking machine correctly can we improve production efficiency, save costs for users and create greater benefits.