Peanut sheller is a kind of mechanical equipment used to quickly shell peanuts, which is widely used in agricultural production. It separates peanut shell from peanut kernel by mechanization, which improves production efficiency and reduces labor intensity. However, during use, many users will find that the frame has a certain degree of shaking. So, is this shaking normal? This paper will analyze this problem.

First, it may be normal for the peanut sheller frame to shake when it is working. This is because the shelling device inside the machine will vibrate when it runs at high speed. Especially in the process of shelling, the friction and collision between peanut kernel and peanut shell will cause certain mechanical vibration. This vibration is transmitted through the rack, which may cause slight shaking of the frame. Therefore, as long as the shaking amplitude is not large and it does not affect the normal operation of the machine, it can be considered as a normal phenomenon in the working process of the equipment.

Second, the degree of frame shaking is closely related to the design, installation and use environment of the machine. High-quality peanut sheller usually takes vibration into account when designing, and reduces shaking through reasonable structural design and counterweight. In addition, it is very important to install the machine correctly. If the machine is not firmly fixed or the ground is uneven, it may aggravate the shaking of the frame. Therefore, before using the peanut sheller, ensure that the equipment is installed smoothly and check whether the screws are tightened.

However, if the frame shakes too much or is accompanied by abnormal noise, there may be problems. This situation may be caused by loose, worn or unbalanced internal parts of the equipment. For example, problems such as eccentricity of shelling drum and bearing damage may cause the frame to shake violently. In addition, overload operation or improper operation may also aggravate the vibration. Therefore, when the frame is found to be shaking abnormally, it should be stopped in time for inspection, and then it can be used again after troubleshooting.

In the end, in order to reduce the impact of frame shaking on equipment performance and service life, users should pay attention to the following points in daily use:

1. Maintain the equipment regularly, check whether the parts are loose or worn, and replace the damaged parts in time.
2. Avoid overload operation and operate according to the load range specified in the equipment manual.
3. Ensure that the machine is installed smoothly and the ground is flat, and use shockproof pads or fixing devices.

To sum up, it is normal for the frame of peanut sheller to shake slightly when working, but if the shaking amplitude is too large or accompanied by abnormal conditions, it needs to be paid attention to and handled in time. Through correct installation, standardized operation and regular maintenance, the frame shaking can be effectively reduced, and the operation stability and service life of the equipment can be improved.

KMEC – Professional Peanut Processing Machinery Manufacturer

Founded in 1992, KMEC is a leading manufacturer specializing in peanut processing machines. Our product range includes: peanut sheller, peanut butter machine, peanut picking machine, peanut peeling machine, peanut grinder machine, fried peanut production line and other peanut processing and accessory equipment.

With decades of experience in agricultural machinery manufacturing, KMEC provides reliable and efficient solutions to meet the evolving needs of peanut producers worldwide.