Sesame washing machine is one of the commonly used equipment in many food processing enterprises, which is used to clean sesame seeds to remove impurities and dirt. However, sometimes we may find that the cleaning speed of sesame washing machine is slow, which not only affects the production efficiency, but also may lead to the increase of production cost. Then, what are the reasons for the slow cleaning speed of sesame washing machine and how to solve them?
The following are some possible reasons and corresponding solutions.
1. Equipment aging or improper maintenance
If the machine is used for a long time, the internal parts may be aged or worn, resulting in a decrease in operating efficiency. In addition, if the equipment is not cleaned and maintained for a long time, dirt will accumulate inside the machine, which will also affect its normal operation.
Solution: Check the parts of the equipment regularly and replace the aging parts in time. At the same time, according to the requirements of the equipment manual, clean and maintain the machine regularly to ensure that it is in the best running state.
2. Insufficient water pressure
Sesame washing machine usually needs a certain amount of water pressure to wash sesame seeds. If the water pressure in the water supply system is insufficient, the cleaning efficiency will naturally decrease.
Solution: Check whether the water supply system operates normally and ensure that the water pressure meets the equipment requirements. If the water pressure is really insufficient, consider increasing the booster pump to increase the water pressure.
3. Too many sesame seeds added
Putting too many sesame seeds at one time may lead to excessive load on the machine, thus affecting the cleaning speed.
Solution: According to the rated capacity of the equipment, the amount of sesame seeds put in each time should be reasonably controlled to avoid overload operation.
4. Excessive impurities or dirt
If the sesame seeds to be cleaned contain too many impurities or sand, these impurities may block the filters or pipelines of the machine, thus affecting the cleaning speed.
Solution: Before sesame seeds enter the machine, they can be preliminarily screened or simply treated to reduce the impurity content. In addition, regularly check and clean the filters and pipes to keep them unobstructed.
5. Water quality problem
If the water quality is poor (such as containing many impurities), it may also affect the cleaning effect and speed.
Solution: Make sure the water is clean. If necessary, a water filtering device can be installed.
The slow cleaning speed of sesame washing machine may be caused by many reasons. Taking appropriate measures to address the specific problem can not only improve cleaning efficiency but also prolong the service life of the equipment. Regular maintenance and proper operation are key to ensuring efficient equipment operation. Hope the above information can help you solve your problem!