Peanut sheller is one of the commonly used equipment in agricultural production, which is mainly used to remove the shells of peanuts and obtain peanut kernels. However, in the process of use, sometimes the problem that the sheller does not discharge materials is encountered, which brings a lot of trouble to users.

So, what are the reasons why the peanut sheller does not discharge?

Firstly, it may be caused by the internal blockage of the machine. In the process of shelling, peanut shells and other impurities may accumulate inside the machine, especially in the discharge port or conveying pipeline. If these impurities are not cleaned up in time, it will lead to blockage, which will affect the normal discharge. The solution to this problem is to clean and maintain the machine regularly to ensure that the internal passages are unobstructed.

Secondly, it may be because the screen or drum of peanut sheller is worn or damaged. Screen and drum are important parts of sheller, and their completeness directly affects the shelling effect. If the screen aperture is too large or the drum is seriously worn, it will lead to the failure of peanut kernels to pass through smoothly, thus resulting in the situation of no discharge. In this case, the damaged parts should be replaced in time to ensure the normal operation of the machine.

Thirdly, improper operation may also lead to the peanut shelling machine not discharging. For example, too much or too fast feeding will overload the machine, which will lead to blockage. In addition, if the water content of peanuts is too high, it will also affect the shelling effect, because wet peanuts are easier to stick together and difficult to be effectively separated. Therefore, the feeding speed should be controlled during the operation, and the peanuts should be ensured to reach an appropriate dryness.

Finally, the problem of the power system may also lead to the failure of discharging. If the motor or transmission fails, the machine can’t run normally, and naturally it can’t discharge. At this point, it is necessary to check whether the motor works normally, whether the drive belt is loose or broken, and repair or replace it in time.

There are numerous reasons why a peanut shelling machine may fail to discharge material, including blockages, component wear, operational errors, or power supply issues. By understanding these common problems and implementing proactive maintenance and proper operating procedures, users can ensure smooth and efficient operation of the peanut shelling machine. This not only enhances productivity but also maximizes the return on investment for agricultural processing equipment.

We hope this guide assists you in maintaining your peanut sheller at peak performance. For more information on peanut shelling machines and agricultural processing solutions, please visit our website or contact our support team.